Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 126/1523
6.2.6.11 set igmp mcrtrexpiretime
The user can go to the CLI Interface VLAN Configuration Mode to set the Multicast Router Present
Expiration time on a particular VLAN, use the set igmp mcrtrexpiretime <vlan-id> <0-3600> vlan
configuration command. Use the no set igmp mcrtrexpiretime <vlan-id> to return to default value 0.
set igmp mcrtrexpiretime <vlan-id> <0-3600>
no set igmp mcrtrexpiretime <vlan-id>
<vlan-id> - VLAN ID (Range: 1 – 4093).
<0-3600> - The range of the Multicat Router Present Expire time is 0 to 3600 seconds
Default Setting
0
Command Mode
VLAN database
6.2.6.12 ip igmp snooping static
The user can go to the Global Mode and add a port to multicast group, use the ip igmp snooping static
Global command. The MAC address of the L2Mcast Group in the format 01:00:5e:xx:xx:xx.
ip igmp snooping static <macaddr> vlan <vlan-id> interface {<slot/port> | port-channel
<portchannel-id>}
no ip igmp snooping static <macaddr> vlan <vlan-id> interface {<slot/port> | port-channel
<portchannel-id>}
<vlan-id> - VLAN ID (Range: 1 – 4093).
<macaddr> - Static MAC address.
<slot/port> - Interface number.
<portchannel-id> - Port-channel interface number. The range of port-channel ID is 1 to 64.
Default Setting
None
Command Mode
Global Config
To Next Page
Loading...
Need help?
General