_____________________________________________________________________________
LB9 User’s Guide 1292/1523
one greater than the highest sequence number currently in use for this interface and direction will be
used. Valid range is (1 to 4294967295).
Non-Configurable Data
Interface - Displays selected interface.
Direction - Displays selected packet filtering direction for ACL.
ACL Type - Displays the type of ACL assigned to selected interface and direction.
ACL Identifier - Displays the ACL Number(in case of IP ACL) or ACL Name(in case of MAC ACL)
identifying the ACL assigned to selected interface and direction.
Sequence Number - Displays the Sequence Number signifying the order of specified ACL relative
to other ACLs assigned to selected interface and direction.
Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is performed.
Remove - Removes the currently selected ACL Interface Direction Mapping from the switch
configuration.
To Next Page
Loading...
Need help?
General