_____________________________________________________________________________
LB9 User’s Guide 1309/1523
Non-Configurable Data
Policy Type - In indicates the type is specific to inbound traffic direction. Out indicates the type is
specific to outbound traffic direction. Only when a new policy is created, this field is a selector field.
After policy creation this becomes a non-configurable field displaying the configured policy type.
Member Class List - Displays all the member classes for the selected DiffServ policy. It is
automatically updated as a new class is added to or removed from the policy. Only when an existing
policy class instance is to be removed, is this field a selector field. After removal of the policy class
instance this becomes a non-configurable field.
Available Class List - Displays all the member classes for the specified policy. It is automatically
updated as a new class is added to or removed from the policy. Only when a new policy class
instance is to be created is this field a selector field. After creation of the policy class instance this
becomes a non-configurable field.
Command Buttons
Submit - Send the updated screen to the switch and cause the changes to take effect on the switch
but these changes will not be retained across a power cycle unless a save is performed.
Delete - Delete the currently selected filter.
Rename - Allows to rename a specified policy.
Add Selected Class - Creates a policy class instance by attaching the policy to the specified class.
Remove Selected Class - Removes a policy class instance by detaching the policy from the
specified class.
To Next Page
Loading...
Need help?
General