_____________________________________________________________________________
LB9 User’s Guide 1371/1523
11.6.5.4 Adding Interface IP Helper Address
Configurable Data
Source IP Interface - Select the interface from the pull-down menu for which user wants to
configure the relay entry
UDP Destination Port - Select the Destination UDP port Name from the pull down menu or
configure the port number to configure the Relay Entry on selected interface.
Discard - If True, packets arriving on the given interface with the given destination UDP port are
discarded rather than relayed. Discard entries are used to override global IP helper address entries
which otherwise might apply to a packet.
Server Address - The IPv4 address of the server to which packets are relayed for the specific UDP
Destination Port.
Command Buttons
Submit - Update the switch with the values on the screen. If you want the switch to retain the new
values across a power cycle you must perform a save.
Cancel - Discards the changes made on the page.
To Next Page
Loading...
Need help?
General