_____________________________________________________________________________
LB9 User’s Guide 143/1523
6.2.8.5 show mac-address-table mldsnooping
The user can go to the CLI Privilege Exec to display the MLD Snooping entries in the Multicast
Forwarding Database (MFDB) table, use the show mac-address-table mldsnooping Privilege
command.
Default Setting
None
Command Mode
Privileged Exec
Display Message
MAC Address: A multicast MAC address for which the switch has forwarding or filtering information.
The format is twodigit hexadecimal numbers that are separated by colons, for example
33:33:45:67:89:AB.
Type: The type of entry, which is either static (added by the user) or dynamic (added to the table as
a result of a learning process or protocol.)
Description: The text description of this multicast table entry.
Interfaces: The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
6.2.8.6 ipv6 mld snooping
The user can go to the CLI Global Configuration Mode to set MLD Snooping on the system , use the
ipv6 mld snooping global configuration command. Use the no ipv6 mld snooping to disable MLD
Snooping on the system.
To Next Page
Loading...
Need help?
General