Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 144/1523
6.2.8.7 clear mld snooping
The user can go to the CLI Global/Interface Configuration Mode to clear MLD Snooping on the system,
use the clear mld snooping priviledge configuration command.
Default Setting
None
Command Mode
Privilege Exec
6.2.8.8 ipv6 mld snooping interfacemode
The user can go to the CLI Global/Interface Configuration Mode to set MLD Snooping on one interface
or all interfaces, use the ipv6 mld snooping interfacemode to enable MLD snooping on
global/interface. Use the no ipv6 mld snooping interfacemode to disable MLD Snooping on global/
interfaces.
ipv6 mld snooping interfacemode [<all>]
no ipv6 mld snooping interfacemode [<all>]
Default Setting
Disabled
Command Mode
Global Config
Interface Config