Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 147/1523
6.2.8.13 ipv6 mld snooping static
The user can go to the Global Mode and add a port to ipv6 multicast group, use the ipv6 mld snooping
static Global command.
ipv6 mld snooping static <macaddr> vlan <vlan-id> interface {<slot/port> | port-channel
<portchannel-id>}
no ipv6 mld snooping static <macaddr> vlan <vlan-id> interface {<slot/port> | port-channel
<portchannel-id>}
<macaddr> - Static MAC address.
<vlan-id> - VLAN ID (Range: 1 – 4093).
<slot/port> - Interface number.
<portchannel-id> - Port-channel interface number. The range of port-channel ID is 1 to 64.
Default Setting
None
Command Mode
Global Config
6.2.8.14 set mld
The user can go to the CLI VLAN database Mode to set MLD Snooping on a particular VLAN, use the
set mld <vlan-id> vlan configuration command. Use the no set mld <vlan-id> to disable MLD
Snooping on a particular VLAN.
set mld <vlan-id>
no set mld <vlan-id>
<vlan-id> - VLAN ID (Range: 1 – 4093).
Default Setting
Disabled
Command Mode
VLAN database
To Next Page
Loading...
Need help?
General