_____________________________________________________________________________
LB9 User’s Guide 1471/1523
11.8.7.7 Configuring Candidate RP Configuration
Selection Criteria
RP Interface - Select the interface for which the Candidate RP has to be configured.
Configurable Data
Group Address - The group address transmitted in Candidate-RP-Advertisements
Group Mask - The group address mask transmitted in Candidate-RP-Advertisements.
Delete - Check box to delete the particular entry from the table.
Non-Configurable Data
Next CRP Advertisement - The time remaining to send the next Candidate-RP-Advertisement.
Command Buttons
Submit - Update the switch with the values on the screen. If you want the switch to retain the new
values across a power cycle you must perform a save.
Delete - Attempts to remove the specified Candidate RP Address for the PIM-SM router.
Configuration changes take effect immediately. These changes will not be retained across a power
cycle unless a save is performed.
To Next Page
Loading...
Need help?
General