_____________________________________________________________________________
LB9 User’s Guide 1509/1523
Priority Group ID - Get the Scheduling priority map of the PG for an interface
Max Traffic Class - It is always 8
---Field of Operation Type---
Feature - Priority Flow Control or Priority Group
Oper Version - Get opertional version for DCBX PFC or PG feature
Max Version - Get max version for DCBX PFC or PG feature
Errors - Get error reason string- "None", "Cfg Mismatch", "Err Cfg", "Multi-TLVs", "Peer Error",
"Multi-Peer", "No TLV",
Operation Mode - Get the operational mode of the PFC or PG for an interface
Syncd With Peer - Get feature sync for DCBX PFC or PG feature
Priority Mask - Get the operational priority map of the PFC for an interface
Group Bandwidth - Get the operational bandwidth of the PG for an interface
Priority Group ID - Get the operational priority map of the PG for an interface
Max Traffic Class - It is always 8
---Field of Peer Configuration Type---
Feature - Priority Flow Control or Priority Group
Local Interface - Which local interface that connect with peer (The same with what port you select to
see now in "interface" field)
Status - Get status (Error bit) for Peer DCBX PFC or PG feature
Enable - Get administrative mode setting for Peer DCBX PFC or PG feature
Willing - Get willing mode setting for Peer DCBX PFC or PG feature
Priority Mask - Get priority map for Peer DCBX PFC feature
Group Bandwidth - Get bandwidth of the Peer DCBX PG feature
Priority Group ID - Get priority map for Peer DCBX PG feature
Max Traffic Class - Get the peer number of traffic class.In PFC it is always 8 but in PG it is not
always 8
Command Buttons
Refresh - Update the data on the page
To Next Page
Loading...
Need help?
General