Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 178/1523
6.2.11.7 switchport multicast rate
This command will protect your network from multicast storms by setting a threshold level for multicast
traffic on each port.
switchport multicast rate <1-14880000>
<1-14880000> - Specify the threshold for multicast traffic
Note: pps (packet per second)
Default Setting
4160 for 10G interfaces
512 for 1G interfaces
Command Mode
Interface Config
This command will protect your network from multicast storms by setting a threshold level for multicast
traffic on all ports.
switchport multicast all rate <1-14880000>
<1-14880000> - Specify the threshold for multicast traffic.
all - This command represents all interfaces.
Note: pps (packet per second)
Default Setting
4160 for 10G interfaces
512 for 1G interfaces
Command Mode
Global Config