Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 191/1523
6.3.1.2 show ip filter
This command displays management IP filter status and all designated management stations.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Manegement IP Filter Address Table: The admin mode status for IP filter.
Index: The index of stations.
IP Address: The IP address of stations that are allowed to make configuration changes to the
Switch.
6.3.1.3 mtu
This command sets the maximum transmission unit (MTU) size (in bytes) for physical and port-channel
(LAG) interfaces. For the standard implementation, the range of <1518-12288> is a valid integer
between 1518-12288.
<1518-12288> - Max frame size (Range: 1518 - 12288).
no - This command sets the default maximum transmission unit (MTU) size (in bytes) for the
interface.
Default Setting
1518
Command Mode
Interface Config
To Next Page
Loading...
Need help?
General