Quanta Computer T5016-LB8D User Manual

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 227/1523
6.3.6.6 snmptrap ipaddr <name> <ipAddr|ipv6Addr|hostname> <new
ipAddr|ipv6Addr|hostname>
This command changes the IP address of the trap receiver for the specified community name. The
maximum length of name is 16 case-sensitive alphanumeric characters.
i
IP addresses in the SNMP trap receiver table must be unique for the same community
name. If you make multiple entries using the same IP address and community name, the
first entry is retained and processed. All duplicate entries are ignored.
Syntax
snmptrap ipaddr <name> <ipAddr|ipv6Addr|hostname> <new ipAddr|ipv6Addr|hostname>
<name> - SNMP trap name.
<ipAddr|ipv6Addr|hostname> - an original IPv4 or IPv6 address or hostname.
<new ipAddr|ipv6Addr|hostname> - a new IPv4 or IPv6 address or hostname.
Default Setting
None
Command Mode
Global Config

Quanta Computer T5016-LB8D Specifications

General

Brand	Quanta Computer
Model	T5016-LB8D
Category	Switch
Language	English