Quanta Computer T5016-LB8D - Page 232

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 232/1523
6.3.6.12 snmp-server engineID
This command configures snmp engineID.
Syntax
snmp-server engineID remote <ipAddr|ipv6Addr> <engineid-string>
no snmp-server engineID remote <ipAddr|ipv6Addr> <engineid-string>
<ipAddr|ipv6Addr> - Enter IP or IPv6 address of the remote device.
<engineid-string> - Enter the name of a copy of SNMP. The maximum length of the name is 24
characters.
no - This command removes snmp engineID.
Default Setting
None
Command Mode
Global Config