Quanta Computer T5016-LB8D - Page 233

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 233/1523
6.3.6.13 snmp-server user
This command configures snmp server user for SNMPv3.
Syntax
snmp-server user <username> auth { noauth | { md5 <passtype> <pass> [ priv des <passtype>
<pass> ] } | { sha <passtype> <pass> [ priv des <passtype> <pass> ] } }
no snmp-server user <username>
<username> - Username of SNMPv3.
<auth> - auth types include noauth, md5, and sha, when use md5 or sha as the auth type, one
should have a pass.
<passtype> - 0 specifies password in plain text, 7 specifies password in encrypted form.
<pass> - password string in plain text or encrypted format.
no - This command removes snmp user.
Default Setting
None
Command Mode
Global Config