Quanta Computer T5016-LB8D User Manual

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 270/1523
6.3.16.2.3 periodic
Use this command to add a periodic time entry to a time range. The time parameter is based off of the
currently configured time zone.
The first occurrence of the days-of-the-week argument is the starting day(s) from which the
configuration that referenced the time range starts going into effect. The second occurrence is the
ending day or days from which the configuration that referenced the time range is no longer in effect. If
the end days-of-the-week are the same as the start, they can be omitted
This argument can be any single day or combinations of days: Monday, Tuesday, Wednesday,
Thursday, Friday, Saturday, Sunday. Other possible values are:
 daily — Monday through Sunday
 weekdays — Monday through Friday
 weekend — Saturday and Sunday
If the ending days of the week are the same as the starting days of the week, they can be omitted. The
first occurrence of the time argument is the starting hours:minutes which the configuration that
referenced the time range starts going into effect. The second occurrence is the ending hours:minutes at
which the configuration that referenced the time range is no longer in effect.
The hours:minutes are expressed in a 24-hour clock. For example, 8:00 is 8:00 am and 20:00 is 8:00
pm.
Syntax
periodic {days-of-the-week time} to {[days-of-the-week] time}
no periodic {days-of-the-week time} to {[days-of-the-week] time}
no - This command deletes a periodic time entry from a time range.
Default Setting
None
Command Mode
Time-Range Config

Quanta Computer T5016-LB8D Specifications

General

Brand	Quanta Computer
Model	T5016-LB8D
Category	Switch
Language	English