_____________________________________________________________________________
LB9 User’s Guide 278/1523
Transitions Out Of Loop Inconsistent State: The count number of transitions out of loop
inconsistent state.
This command displays the settings of one or all ports within the specified multiple spanning tree
instance. The parameter <0-4094> indicates a particular MST instance. The parameter {<slot/port>}
indicates the desired switch port.
If 0 (defined as the default CIST ID) is passed as the <0-4094>, then the status summary is displayed for
one or all ports within the common and internal spanning tree.
<0-4094> - multiple spanning tree instance ID.
<slot/port> - is the desired interface number.
active - All active interfaces.
<portchannel-id> - is the desired port-channel interface number. The range of port-channel ID is 1
to 64.
no parameter - All interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
MST Instance ID: The MST instance associated with this port.
Interface: The interface being displayed.
STP Mode: Indicate STP mode.
Type: Currently not used.
STP State: The forwarding state of the port in the specified spanning tree instance.
Port Role: The role of the specified port within the spanning tree.
Desc: The port in loop inconsistence state will display “*LOOP_Inc”.
To Next Page
Loading...