Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 284/1523
6.4.2.6 spanning-tree max-age
This command sets the Bridge Max Age parameter to a new value for the common and internal spanning
tree. The max-age value is in seconds within a range of 6 to 40, with the value being less than or equal
to "2 times (Bridge Forward Delay - 1)" and greater than or equal to “2 times (Bridge Hello Time + 1)”.
spanning-tree max-age <6-40>
no spanning-tree max-age
<6-40> - the Bridge Max Age value (Range: 6 – 40).
no - This command sets the Bridge Max Age parameter for the common and internal spanning tree
to the default value, that is, 20.
Default Setting
20
Command Mode
Global Config
6.4.2.7 spanning-tree max-hops
This command sets the MSTP Max Hops parameter to a new value for the common and internal
spanning tree. The max-hops value is in a range of 6 to 40.
spanning-tree max-hops <6-40>
no spanning-tree max-hops
<6-40> - the Maximum hops value (Range: 6-40).
no - This command sets the Bridge Max Hops parameter for the common and internal spanning tree
to the default value.
Default Setting
20
Command Mode
Global Config
To Next Page
Loading...
Need help?
General