Quanta Computer T5016-LB8D - Page 290

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 290/1523
6.4.2.11 spanning-tree auto-edge
This command sets the auto-edge for this port to enabled.
Syntax
spanning-tree auto-edge
no spanning-tree auto-edge
no - This command sets the auto-edge for this port to disabled.
Default Setting
Disabled
Command Mode
Interface Config
6.4.2.12 spanning-tree edgeport
This command sets the edguport function to Enabled or Disabled on this switch.
Syntax
spanning-tree edgeport
no spanning-tree edgeport
no - This command sets the Edgeport function to the default value, that is Enabled.
Default Setting
Enabled
Command Mode
Global Config