_____________________________________________________________________________
LB9 User’s Guide 330/1523
6.8.1.15 show captive-portal client [macaddr] status
This command reports status of the captive portal feature.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Client MAC Address: Identifies the MAC address of the client (if applicable).
Client IP Address: Identifies the IP address of the client (if applicable).
Protocol Mode: Shows the current connection protocol, which is either HTTP or HTTPS.
Verification Mode: Shows the current account type, which is Guest, Local, or RADIUS.
Failure Count: The number of times that user login failed.
Session Time: Shows the amount of time that has passed since the client was authorized.
If you specify a client MAC address, the following additional information displays:
CP ID: Shows the captive portal ID the connected client is using.
CP Name: Shows the name of the captive portal the connected client is using.
Interface: Valid slot and port number separated by a forward slash.
Interface Description: Describes the interface.
User Name: Displays the user name (or Guest ID) of the connected client.
To Next Page
Loading...
Need help?
General