_____________________________________________________________________________
LB9 User’s Guide 331/1523
6.8.1.16 show captive-portal configuration <cp-id>
This command displays the operational status of each captive portal configuration. The <cp-id> variable
is the captive portal ID, which ranges from 1-10.
Default Setting
None
Command Mode
Privileged Exec
Display Message
CP ID: Shows the captive portal ID.
CP Name: Shows the captive portal name.
Operational Status: Shows whether the captive portal is enabled or disabled.
Disable Reason: If the captive portal is disabled, this field indicates the reason.
Blocked Status: Shows the blocked status, which is Blocked or Not Blocked.
Authenticated Users: Shows the number of authenticated users connected to the network through
this captive portal.
Configured Locales: Shows the number of locales defined for this captive portal.
To Next Page
Loading...