_____________________________________________________________________________
LB9 User’s Guide 336/1523
6.8.1.22 show captive-portal interface capability [slot/port]
This command displays all the captive portal eligible interfaces or the interface capabilities for a specific
captive portal interface.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface: Valid slot and port number separated by a forward slash.
Interface Description: Describes the interface.
Type: Shows the type of interface.
If you use the optional [slot/port] information, the following additional information appears:
Session Timeout: Indicates whether or not this field is supported by the specified captive portal
interface.
Idle Timeout: Indicates whether or not this field is supported by the specified captive portal
interface.
Bytes Received Counter: Indicates whether or not this field is supported by the specified captive
portal interface.
Bytes Transmitted Counter: Indicates whether or not this field is supported by the specified captive
portal interface.
Packets Received Counter: Indicates whether or not this field is supported by the specified captive
portal interface.
To Next Page
Loading...