Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 374/1523
6.8.4.13 Captive Portal max bytes allowed to output/transmit
This command is used to limit the number of octets in bytes that the user is allowed to receive. After this
limit has been reached, the user will be disconnected. 0 octets denote unlimited transmission.
user <1-128> max-output-octets <0-4294967295>
no user <1-128> max-output-octets
Default Setting
0
Command Mode
Captive Portal Config
6.8.4.14 Captive Portal max total allowed to transmit and receive
This command is used to limit the number of octets in bytes that the user is allowed to transmit and
receive. The maximum number of octets is the sum of octets transmitted and received. After this limit
has been reached, the user will be disconnected. 0 octets denote unlimited transmission.
user <1-128> max-total-octets <0-4294967295>
no user <1-128> max-total-octets
Default Setting
0
Command Mode
Captive Portal Config
To Next Page
Loading...