Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 406/1523
6.8.4.78 radius server attribute 4
This command to set the NAS-IP address for the radius server.
radius server attribute 4 <ipaddr>no radius server attribute 4
no – use this command to reset the NAS-IP address for the radius server.
Default Setting
None
Command Mode
Global Config
6.8.4.79 radius server attribute 95
This command to set the NAS-IPv6 address for the radius server.
radius server attribute 95 [ipv6 address]
no radius server attribute 95
no – use this command to reset the NAS-IPv6 address for the radius server.
Default Setting
None
Command Mode
Global Config