Quanta Computer T5016-LB8D - Page 455

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 455/1523
6.11.2.3 voice-vlan mac
This command is used to add a voice device to a Voice VLAN.
Syntax
voice-vlan mac <mac-address> mask <mac-mask> priority <priority-id> [name <voice-name>]
no voice-vlan {mac <mac-address>mask <mac-mask>|name <voice-name>| all}
<mac-address> - Configs voice vlan mac address.
<mac-mask> - Configs voice vlan mac mask.
<priority-id> - Configs voice vlan priority.
<voice-name> - Configs voice vlan name.
no - This commandcancels the Voice VLAN configuration of this VLAN.
Default Setting
None
Command Mode
Global Config
6.11.2.4 voice vlan
This command is used to enable/disable Voice VLAN Admin Mode.
Syntax
voice vlan
no voice vlan
no - This command disables the Voice VLAN capability on this switch.
Default Setting
Disabled
Command Mode
Global Config