_____________________________________________________________________________
LB9 User’s Guide 456/1523
This command configures the Voice VLAN capability on the interface.
<vlan-id> - Configure the IP phone to forward all voice traffic through the specified VLAN.
<dot1p> - Configure th IP phone to use 802.1p priority tagging for voice traffic and to use the default
native VLAN (0) to carr
y all traff
ic. The valid <priorit
y> range is 0 to 7.
<none> - Allow the IP phone to use its own configuration to send untagged voice traffic.
<untagged> - Configure the phone to send untagged voice traffic.
no - This command disables the Voice VLAN capability on this switch.
Default Setting
Disabled
Command Mode
Interface Config
6.11.2.5 voice vlan data priority
Use this command to either trust or entrust the data traffic arriving one the Voice VLAN port.
To Next Page
Loading...
Need help?
General