Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 560/1523
6.19.1.2 show ip arp inspection
This command displays the Dynamic ARP Inspection global configuration and configuration on all the
VLANs. With the vlan-list argument (i.e. comma separated VLAN ranges), the command displays the
global configuration and configuration on all the VLANs in the given VLAN list. The global configuration
includes the source mac validation, destination mac validation and invalid IP validation information.
show ip arp inspection [vlan <vlan-list>]
<vlan-list> - Specifies VLAN ID in a list. The range of VLAN ID is 1 to 4093.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Source MAC Validation: Displays whether Source MAC Validation of ARP frame is enabled or
disabled.
Destination MAC Validation: Displays whether Destination MAC Validation is enabled or disabled.
IP Address Validation: Displays whether IP Address Validation is enabled or disabled.
VLAN: The VLAN ID for each displayed row.
Configuration: Displays whether DAI is enabled or disabled on the VLAN.
Log Invalid: Displays whether logging of invalid ARP packets is enabled on the VLAN.
ACL Name: The ARP ACL Name, if configured on the VLAN.
Static Flag: If the ARP ACL is configured static on the VLAN.
To Next Page
Loading...
Need help?
General