Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 600/1523
6.20.3.15 policy-map
This comm
and establishes a new Dif
fServ polic
y. The <polic
yname> param
eter is a case-
sensitive
alphanumeric string from 1 to 31 characters uniquely identifying the policy. The type of policy is specific
to the inbound traffic direction as indicated by the in parameter.
policy-map <policyname> [{in | out} ]
no policy-m
ap <policyname>
no – this command is to delete this policy.
in|out - The direction value is either in or out
Command Mode
Global Config
6.20.3.16 policy-map rename
This comm
and changes the name of
a DiffServ polic
y. The <po
licyname>
is the
nam
e of an existing
DiffServ class. The <newpolicyname> parameter is a case-sensitive alphanumeric string from 1 to 31
characters uniquely identifying the policy.
policy-map renam
e <polic
yname> <newpolic
yname>
<policyname> - Old Policy name.
<newpolicyname> - New policy name.
Command Mode
Global Config
To Next Page
Loading...
Need help?
General