_____________________________________________________________________________
LB9 User’s Guide 610/1523
6.20.5.6 show policy-map interface
This command displays policy-oriented statistics information for the specified interface and direction.
<slot/port> - specifies a valid slot number and port number for the system. The direction parameter
indicates the interface direction of interest.
<portchannel-id> - Specifies the port-channel interface. The range of port-channel ID is 1 to 64.
Command Mode
Privileged Exec
Display Message
Interface: The slot number and port number of the interface (slot/port).
Direction: The traffic direction of this interface service, either in or out.
Operational Status: The current operational status of this DiffServ service interface.
Policy Name: The name of the policy attached to the interface in the indicated
direction.
The following information is repeated for each class instance within this policy:
Class Name: The name of this class instance.
In Offered Packets: A count of the packets offered to this class instance before the defined DiffServ
treatment is applied. Only displayed for the 'in' direction.
In Discarded Packets: A count of the packets discarded for this class instance for any reason due
to DiffServ treatment of the traffic class. Only displayed for the 'in' direction.
None of the counters listed here are guaranteed to be supported on all platforms. Only
supported counters are shown in the display output.
To Next Page
Loading...
Need help?
General