Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 611/1523
6.20.5.7 show service-policy
This command displays a summary of policy-oriented statistics information for all interfaces in the
specified direction. The direction parameter indicates the interface direction of interest. This command
enables or disables the route reflector client. A route reflector client relies on a route reflector to
re-advertise its routes to the entire AS. The possible values for this field are enable and disable.
Command Mode
Privileged Exec
Display Message
The following information is repeated for each interface and direction (only those interfaces
configured with an attached policy are shown):
Interface: The slot number and port number of the interface (slot/port).
Operational Status: The current operational status of this DiffServ service interface.
Policy Name: The name of the policy attached to the interface.
None of the counters listed here are guaranteed to be supported on all platforms. Only
supported counters are shown in the display output.
To Next Page
Loading...
Need help?
General