Quanta Computer T5016-LB8D - Page 800

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 800/1523
8.2.2.8 ip igmp startup-query-count
This command sets the number of Queries sent out on startup, separated by the Startup Query Interval
on the interface.
Syntax
ip igmp startup-query-count <1-20>
no ip igmp startup-query-count
<1-20> - The range for <1-20> is 1 to 20.
no - This command resets the number of Queries sent out on startup, separated by the Startup
Query Interval on the interface to the default value.
Default Setting
2
Command Mode
Interface Config
8.2.2.9 ip igmp startup-query-interval
This command sets the interval between General Queries sent by a Querier on startup on the interface.
The time interval value is in seconds.
Syntax
ip igmp startup-query-interval <1-300>
no ip igmp startup-query-interval
<1-300> - The range for <1-300> is 1 to 300 seconds.
no - This command resets the interval between General Queries sent by a Querier on startup on the
interface to the default value.
Default Setting
31
Command Mode
Interface Config