_____________________________________________________________________________
LB9 User’s Guide 867/1523
9.3.1.3 show ipv6 interface neighbors
This command displays information about the IPv6 neighbors.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Count of Learned Neighbors the number of neighbor mac address be learned.
Interface: Shows the interface in slot/port format.
IPv6 Address: IPV6 address of neighbor or interface.
MAC Address: Link-layer Address.
IsRtr: Shows whether the neighbor is a router. If the value is TRUE, the neighbor is known to be a
router, and FALSE otherwise. A value of FALSE might not mean Note that routers are not always
known to be routers.
Neighbor State: State of neighbor cache entry. Possible values are Incomplete, Reachable, Stale,
Delay, Probe, and Unknown.
Age(Seconds): The time in seconds that has elapsed since an entry was added to the cache.
To Next Page
Loading...
Need help?
General