_____________________________________________________________________________
LB9 User’s Guide 868/1523
9.3.1.4 show ipv6 ndp
This command displays NDP cache information for the management port.
Default Setting
None
Command Mode
Privilege Exec
Display Message
IPv6 Address: The IPv6 address of the interface.
MAC Address: The MAC Address used.
isRtr: Specifies the router flag.
Neighbor State: The state of the neighbor cache entry. Possible values are: Reachable, Delay.
Age Updated: The time in seconds that has elapsed since an entry was added to the cache.
To Next Page
Loading...
Need help?
General