_____________________________________________________________________________
LB9 User’s Guide 871/1523
9.3.1.7 show ipv6 route summary
This command displays the summary of the routing table. Use all to display the count summary for all
routes, including best and non-best routes. Use the command without parameters to display the count
summary for only the best routes.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Connected Routes: Total number of connected routes in the routing table.
Static Routes: Shows whether the IPv6 unicast routing mode is enabled.
RIPng Routes: Total number of routes installed by RIPng protocol.
6to4 Routes: Total number of 6to4 routes in the routing table.
OSPF Routes: Total number of routes installed by OSPFv3 protocol.
Reject Routes : Total number of reject routes installed by all protocols.
Number of Prefixes: Summarizes the number of routes with prefixes of different lengths.
Total Routes: Shows the total number of routes in the routing table.
To Next Page
Loading...
Need help?
General