_____________________________________________________________________________
LB9 User’s Guide 904/1523
9.4.1.11 show ipv6 ospf range
This comm
and displays inform
ation about the area ranges f
or the specified <are
aid>. The <areaid>
identifies the OSPF area whose ranges are being displayed.
<areaid> - The area id of the requested OSPF area
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
Area ID: The area id of the requested OSPF area.
IP Address: An IP Address which represents this area range.
Subnet Mask: A valid subnet mask for this area range.
Lsdb Type: The type of link advertisement associated with this area range.
Advertisement: The status of the advertisement. Advertisement has two possible settings: enabled
or disabled.
To Next Page
Loading...
Need help?
General