Quanta Computer T5016-LB8D User Manual

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 905/1523
9.4.1.12 show ipv6 ospf stub table
This command displays the OSPF stub table. The information bello will only be displayed if OSPF is
initialized on the switch.
Syntax
show ipv6 ospf stub table
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
Area ID: Is a 32-bit identifier for the created stub area.
Type of Service: Is the type of service associated with the stub metric. Only supports Normal TOS.
Metric Val: The metric value is applied based on the TOS. It defaults to the least metric of the
type of service among the interfaces to other areas. The OSPF cost for a route is a
function of the metric value.
Import Summary LSA: Controls the import of summary LSAs into stub areas.

Quanta Computer T5016-LB8D Specifications

General

Brand	Quanta Computer
Model	T5016-LB8D
Category	Switch
Language	English