Quanta Computer T5016-LB8D

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 93/1523
6.2.3.8 vlan database
This command is used to enter VLAN Interface configuration mode.
Syntax
vlan database
Default Setting
None
Command Mode
Global Config
6.2.3.9 vlan
This command creates a new VLAN and assigns it an ID. The ID is a valid VLAN identification
number (ID 1 is reserved for the default VLAN). VLAN range is 2-4093.
Syntax
vlan <vlan-list>
no vlan <vlan-list>
<vlan-list> - VLAN ID (Range: 2 – 4093) – separate non-consecutive IDs with ',' and no spaces and
no zeros in between the range; Use '-' for range.
no - This command deletes an existing VLAN. The ID is a valid VLAN identification number (ID 1 is
reserved for the default VLAN). VLAN range is 2-4093.
Default Setting
None
Command Mode
VLAN database