Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 94/1523
6.2.3.10 vlan name
This command changes the name of a VLAN. The name is an alphanumeric string of up to 32
characters, and the ID is a valid VLAN identification number. ID range is 1- 4093.
vlan name <vlan-id> <newname>
no vlan name <vlan-id>
<vlan-id> - VLAN ID (Range: 1 – 4093).
<newname> - Configure a new VLAN Name (up to 32 alphanumeric characters).
no - This command sets the name of a VLAN to a blank string. The VLAN ID is a valid VLAN
identification number. ID range is 1-4093.
Default Setting
The name for VLAN ID 1 is always Default. The name for other VLANs is defaulted to a blank string.
Command Mode
VLAN database
6.2.3.11 vlan association mac
This command associates a MAC address to a VLAN.
vlan association mac <macaddr> <vlan-id> [<priority>]
no vlan association mac <macaddr>
<macaddr> - Enter a MAC Address to display the table entry for the requested MAC address.
<vland-id> - VLAN identification number. ID range is 1-4093.
< priority> - The priority value for untagged frames received. Valid priority value is 0 to 7.
no - This command removes the association of a MAC address to a VLAN.
Default Setting
None
Command Mode
VLAN database
To Next Page
Loading...
Need help?
General