_____________________________________________________________________________
LB9 User’s Guide 974/1523
10.7.1.2 show vmtracer session
This command displays information about a specified VM Tracer session on the system.
<Session_Name>
no parameter - displays all configured VM Tracer sessions.
<session_name> - displays the specific configured VM Tracer session with the name.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Session Name: the configured name of the VM Tracer session.
vCenter URL: the url address of vCenter. It should be start with https://.
Username: the login username of vCenter on the VM Tracer session
Password: the login password of vCenter on the VM Tracer session.
AutoVlan: the mode of AutoVlan. The value should be Enable of Disable.
Allow-Vlan: allow-vlan list of the VM Tracer session.
Session Status: the link state of the VM Tracer session.