_____________________________________________________________________________
LB9 User’s Guide 975/1523
10.7.1.3 show vmtracer vm
The command displays VMs interfaces (Vnics) that are accessible to the switch interfaces where the VM
Tracer interface mode is enabled.
<Info_Level>
no parameter - displays VM name, VM adapter name, assoiated interface, and VLAN value.
detail – displays VM name associated interface vnic, mac, portgroup, vlan, switch and host.
<Vm_Name>
no parameter - displays information for all aooaciated VMs.
<Vm_Name> - displays information for the specific VM.
Default Setting
None
Command Mode
Privileged Exec
Display Message
VM Name: the name of attached VM.
VM Adapter: the adapter name of the VM interface.
Interface: the associated switch interface of attached VM.
VLAN: the VLAN value of the VM interface.
Vnic: the adapter name of the VM interface.
Mac: the network mac address of vnic.
Portgroup: the portgroup of the VM.
Vlan: the vlan value of the VM interface.
Switch: the vSwitch of the VM.
Host: the host of the VM.
To Next Page
Loading...
Need help?
General