_____________________________________________________________________________
LB9 User’s Guide 979/1523
10.7.2.3 autovlan disable
This command disable vlan auto provisioning which allows the dynamic assignment and pruning of
VLANs when a VM attached to the ESX connected to the switch is created, deleted, or moved to a
different ESX host. The autovlan setting controls auto provisioning.
no - this command enables vlan auto provisioning.
Default Setting
no autovlan disable
Command Mode
VM Tracer Config
10.7.2.4 password
The command specifies the token that authorizes the username to the vCenter associated with the VM
Tracer session.
<Encryption> - This command sets encryption level of the password.
0 - the password is a clear text string.
7 - the password is an encrypted string.
<Encryption> - text that authenticates the username.
Default Setting
none
Command Mode
VM Tracer Config
To Next Page
Loading...
Need help?
General