R&S ESR Series

Remote Control
R&S
®
ESR
925User Manual 1175.7068.02 ─ 12
SYSTem:IDENtify[:STRing]............................................................................................. 926
SYSTem:ERRor:CLEar:ALL............................................................................................ 926
SYSTem:ERRor:LIST?................................................................................................... 927
SYSTem:ERRor[:NEXT]?................................................................................................927
DIAGnostic<n>:SERVice:BIOSinfo?
This command queries the CPU board BIOS version.
Suffix:
<n>
.
irrelevant
Return values:
<Version> ASCII string containing the BIOS version, e.g. 47.11.
Example:
DIAG:SERV:BIOS?
Returns the BIOS version.
Usage: Query only
DIAGnostic<n>:SERVice:HWINfo?
This command queries the hardware information.
Suffix:
<n>
.
irrelevant
Return values:
<HardwareInfo> "<component 1>|<serial #>|<order #>|<model>| <hardware
code>|<revision>|<subrevision>",
"<component 2>|<serial #>|<order #>|<model>| <hardware
code>|<revision>|<subrevision>",
...
Table lines are output as string data and are separated by com-
mas. The individual columns of the table are separated from
each other by |.
Example:
DIAG:SERV:HWIN?
Queries the hardware information.
"FRONTEND|100001/003|1300.3009|03|01|00|00",
"MOTHERBOARD|123456/002|1300.3080|02|00|00|00",
...
Usage: Query only
Manual operation: See "Hardware Info" on page 524
DIAGnostic<n>:SERVice:VERSinfo?
This command queries information about the hardware and software components.
Suffix:
<n>
.
irrelevant
System Configuration