OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 MAY 2009
MMC: 701
6. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
Table A. COS Feature List by Option Number
USABLE FEATURE
Item # LCD Display Description
00 AA CALER Forced Auto Answer (FAUTO)
01 NOT USED
02 NOT USED
03 AUTO RDL Auto redial when dialing a busy number
04 CALLBACK Set Callback to another station
05 CID ABND View Caller ID of missed calls
06 CID INQR Caller ID Inquire
07 CID INVT Caller ID Investigate
08 CONFER. Can initiate add-on Conference
09 DALM CLR Clear DISA alarm
10 DIRECT. Access system Directory
11 DISA Use DISA
12 DND Use Do Not Disturb
13 DND FWRD Can set Do Not Disturb Forwarding
14 DND OVRD Can override Do Not Disturb
15 DOOR Can answer a ringing Doorphone
16 DSS Allow Direct Station Select (DSS) keys
17 DTS Allow Direct Trunk Select (DTS) keys
18 NOT USED
19 EXT FWD Allow External Call Forwarding
20 FEATURE Allow Transfer feature
21 FLASH Can use Trunk Flash
22 FOLOW-ME Allow Follow-Me Forwarding
23 FORWARD Allow Call Forwarding
24 NOT USED
25 GRP/IO Can log in or out of a Station Group
26 HOLD Allowed to place calls on Hold
27 HOTLINE Can have a Hotline destination set
28 INTERCOM Allowed to dial other stations
30 MESSAGE Allowed to set Station Messages
31 MM PAGE Can use Meet-Me Paging
32 MMC PSWD Set Password Protect for MMCs 100~199
33 NEW CALL Can use the New Call key
34 OHVAED Allowed to receive OHVA calls
35 OHVAING Allowed to make OHVA calls
To Next Page
