OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 714
• iDCS, DS and ITP KEYSETS
COUNT 1 2 3 4 5
DIAL 0 < > . ) 0
DIAL 1 space ? , ! 1
DIAL 2 A B C @ 2
DIAL 3 D E F # 3
DIAL 4 G H I $ 4
DIAL 5 J K L % 5
DIAL 6 M N O ^ 6
DIAL 7 P Q R S 7
DIAL 8 T U V
4
8
DIAL 9 W X Y Z 9
DIAL 4 : = [ ]
4
1. When the character you want appears on the same dial pad key as the
previous character, press UP to move the cursor one space to the right.
2. Other symbols are available for DIAL #.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRANSFER 714.
Display shows.
DID DIGIT (001)
DGT:
2. Enter valid index number, e.g. 005,
via dial keypad
DID DIGIT (005)
DGT:
OR
Press UP or DOWN key to make selection.
Press RIGHT soft key to move cursor.
3. Enter digits to be translated (e.g. 5065)
via dial keypad and press RIGHT
DID DIGIT (005)
DGT:5065
soft key to move cursor.
To Next Page
Loading...
