Samsung OFFICESERV 7100 - Page 285

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 714
4. Enter the MOH source for this entry.
OR
DID DIGIT (005)
MOH SOURCE:F-TRK
Press UP or DOWN key to select option.
Press RIGHT soft key to return to step 3 above.
5. Enter station or group number for each Ring
Plan destination via dial keypad (e.g. 530)
DID DIGIT (005)
1:530 2:
OR
Press UP or DOWN key to make selection.
Press RIGHT soft key to advance to next
Ring Plan. Press RIGHT soft key to ENTER and
move cursor.
6. Press UP or DOWN key to make selection or
select via dial pad 1 for YES, 0 for NO.
DID DIGIT (005)
CW:NO DELETE:0
Press RIGHT soft key to advance to the next
step.
7. Enter the number of digits to be deleted and
press RIGHT soft key to return to step 1,
DID DIGIT (005)
CW:YES DELETE:0
OR
Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: NO ENTRIES
RELATED ITEMS: TRUNK PROGRAMMING
Home Page
Table of Contents