OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 726
[ ]+[205]+[ ]+[ ]
DIL 701 calls group 501 that overflows to VM/AA:
[ # ]+[501]+[x]+[701]
In the above example, if overflow information is turned off:
[ ]+[ ]+[ ]+[ ] (Nothing is sent)
A DID call rings the VM/AA directly:
[ B ]+[9999]+[ ]+[ ]
9999 are the DID digits from C.O.
In the above example, if did information is turned off:
[ ]+[9999]+[ ]+[ ]
A station transfers (blind or screened) a call (C.O., DID or intercom) to VM/AA
group or port. When the transferring station hangs up (blind transfer):
[ ]+[ ]+[ ]+[ ] (Nothing is sent)
A station (202) transfers a C.O. call (702) to a station (225) that is Call Forward
All to a VM/AA group or port. When the transferring station hangs up (blind
transfer) and the VM/AA group or port answers:
[ # ]+[225]+[x]+[702]
A station (202) transfers a C.O. call (702) to a group (501) that overflows to a
VM/AA group or port:
[ # ]+[501]+[ X ]+[702]
In the above example, if overflow information is turned off:
[ ]+[ ]+[ ]+[ ] (Nothing is sent)
A station (205) calls a VM/AA port or group :
[ 4 ]+[205]+[ ]+[ ]
In the above example, if direct information is turned off:
[ ]+[ ]+[ ]+[ ] (Nothing is sent)
A station (205) calls using MESSAGE key:
[ 4 ]+[205]+[ ]+[ ]
In the above example, if message information is turned off:
[ ]+[ ]+[ ]+[ ] (Nothing is sent)
A call (702) recalls back from station 225 to the VM/AA group:
To Next Page
