OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 726
[ # ]+[225]+[x]+[702]
In the above example, if recall and DN2/CO information are turned off:
[ ]+[ ]+[ ]+[ ] (Nothing is sent)
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used in some fields where a value is entered or deleted.
A Used to input alpha character "A"
B Used to insert alpha character "B"
C Used to insert alpha character "C"
ACTION DISPLAY
1. Press TRANSFER 726.
Display shows.
EXT FOR DN1
YES
2. Enter the OPTION number from the
above list (e.g., 4)
SEPERATOR
NO
OR
Press UP or DOWN key to make selection.
Press LEFT soft key to move cursor.
3. Enter 1 for YES or 0 for NO
OR
SEPERATOR
YES
Press UP or DOWN key for selection.
Press RIGHT soft key to return to step 2.
4. If option 0 is selected at step 2.
EXT FOR DN1
YES
5. If option 1 is selected at step 2.
TRK FOR DN1
YES
6. If option 2 is selected at step 2.
EXT FOR DN2
NO
7. If option 3 is selected at step 2.
TRK FOR DN2
NO
To Next Page
