Samsung OFFICESERV 7100 - Page 333

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 726
8. If option 4 is selected at step 2
(A valid entry consists of digits 0–9 or alpha
SEPERATOR
NO
characters A–C).
9. If option 5 is selected at step 2
(A valid entry consists of digits 0–9 or alpha
DISCONECT SIGNAL
C
characters A–C).
10. If option 6 is selected at step 2
(A valid entry consists of digits 0–9 or alpha
CALL TYPE ID
DIRECT CALL : NO
characters A–C).
See above list under the CALL TYPE ID
options list.
11. If option 7 is selected at step 2
(A valid entry consists of digits 0–9 or alpha
PROGRESS TONE ID
DIAL TONE :B
characters A–C).
See above list under the PROGRESS TONE
ID.
DEFAULT DATA: EXT FOR DN1 = YES
TRK FOR DN1 = YES
EXT FOR DN2 = NO
TRK FOR DN2 = NO
SEPARATOR = NO
DISCONNECT SIGNAL = C
CALL TYPE ID = (ALL SUB-OPTIONS 4 OR #)
PROGRESS TONE ID = BA
CALLER ID NUMBER = NO
RELATED ITEMS: NONE
Home Page
Table of Contents