OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 759
TONE: Ring Tone options for a specific CID Number (NO, 1~8)
TONE OPTION
NO Calls will ring with the phone users choice of ring frequency.
1~8
Calls from the programmed CID number will ring phones with this ring
frequency
CAD: Ring Cadence options for a specific CID Number at SLT’s (NO, 1~5)
CADENCE OPTION
NO Calls will ring with the normal SLT’s ring cadences.
1
Calls from the programmed CID number will ring SLT’s with the intercom ring
cadence.
2
Calls from the programmed CID number will ring SLT’s with the CO ring
cadence.
3
Calls from the programmed CID number will ring SLT’s with the DOOR ring
cadence.
4
Calls from the programmed CID number will ring SLT’s with the ALARM ring
cadence.
5
Calls from the programmed CID number will ring SLT’s with the CALLBACK
ring cadence.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRANSFER 759.
Display shows.
CLI RINGING(001)
CLI:
2. Dial entry number (e.g. 005)
OR
CLI RINGING(005)
CLI:_
To Next Page
Loading...
