Samsung OFFICESERV 7100 - Page 418

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 832
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
ACTION DISPLAY
1. Press TRANSFER 832.
Display shows the first access code entry
[0:00] ACCESS DGT
0
number and access code.
2. Press UP or DOWN key to select an entry
OR
[0:00] ACCESS DGT
0
Press RIGHT soft key to move cursor
3. Press RIGHT soft key to move cursor.
Press UP or DOWN key to select an option
[0:00] ACCESS DGT
1
OR
Press RIGHT soft key to move cursor.
[0:00] ACCESS DGT
1
3. Using the keypad input an access code that
will reference an IP address table.
[0:00] ACCESS DGT
80
4. Press RIGHT soft key to enter data and move
cursor.
[0:00] DGT LENGTH
80
Press UP or DOWN key to select an option
entry.
5. Press RIGHT soft key to move cursor. Using
the keypad enter the number of digits in the
[0:00] DGT LENGTH
2
access code. Press RIGHT soft key to enter
data and move cursor.
6. Press UP or DOWN key to select an entry
Press RIGHT soft key to move cursor.
[0:00] DEL. LENGTH
1
7. Using the keypad enter the number of digits
of the access code to delete.
[0:00] DEL. LENGTH
2
Press RIGHT soft key to enter data and to
move cursor.
8. Press UP or DOWN key to select an option.
Press RIGHT soft key to move cursor.
[0:00] INSERT DGT
Home Page
Table of Contents