Samsung OFFICESERV 7100 - Page 441

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 MAY 2009
MMC: 837
2. Press volume UP or DOWN key to select an
option OR press RIGHT soft key to move
TRK : iBG EXPIRE
0010
cursor and press volume UP or DOWN key to
select an option.
3. Press volume UP or DOWN key to select an
option OR press RIGHT soft key to move
EXT : IP-UMS PORT
05070
cursor and press volume UP or DOWN key to
select an option.
4. Press UP or DOWN key to select an option
OR press RIGHT soft key to move cursor
ISP1 : SIP SERVER
DISABLE
cursor and press volume UP or DOWN key to
select an option.
Press UP or DOWN key to select an option
OR press RIGHT soft key to move cursor
ISP2 : SIP SERVER
DISABLE
cursor and press volume UP or DOWN key to
select an option.
Press UP or DOWN key to select an option
OR press RIGHT soft key to move cursor
ISP3 : SIP SERVER
DISABLE
cursor and press volume UP or DOWN key to
select an option.
Press UP or DOWN key to select an option
OR press RIGHT soft key to move cursor
ISP4 : SIP SERVER
DISABLE
cursor and press volume UP or DOWN key to
select an option.
5. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: SIP Stack Configuration
RE-TRANS T1: 5
RE-TRANS T2: 40
RE-TRANS T4: 50
GENERAL RING: 50
INVITE RING: 50
PROVISIONAL: 1800
Home Page
Table of Contents